Table of Contents
Advertisement
INCLUDED IN THIS PACKAGE
•
One electronic activity panel
•
One main walker body
•
Two legs with wheels
•
One walker handle
•
One telephone handset
•
One user's manual
WARNING:
All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child's safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the electronic activity panel. Use a coin or
a screwdriver to loosen the screw.
3. Install 2 new 'AA' (UM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the
screw to secure.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Sit-to-Stand Learning Walker and is the answer not in the manual?
Questions and answers
One of the back wheels will not turn to adjust speed level. How can I fix that?
To fix a back wheel that will not turn on the VTech Sit-to-Stand Learning Walker, follow these steps:
1. Check for Obstructions – Inspect the wheel for any debris, hair, or dust that may be preventing it from turning. Remove any blockage.
2. Ensure Proper Assembly – Make sure the legs and wheels are correctly inserted into the main body. The wheels should be facing outward.
3. Adjust Wheel Locks – Some models have adjustable rear wheels for different resistance levels. Check if the wheel lock is engaged and adjust it if necessary.
4. Tighten or Loosen Screws – If the wheel is too tight or stuck, try loosening the screw slightly. If it is loose, tighten it to ensure proper movement.
5. Test Movement – After making adjustments, push the walker to see if the wheel turns properly.
If the issue persists, refer to the product manual for further troubleshooting.
This answer is automatically generated