Table of Contents
Advertisement
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Sit-to-Stand Learning Walker and is the answer not in the manual?
Questions and answers
One of the back wheels will not turn to adjust speed level. How can I fix that?
To fix a back wheel that will not turn on the VTech Sit-to-Stand Learning Walker, follow these steps:
1. Check for Obstructions – Inspect the wheel for any debris, hair, or dust that may be preventing it from turning. Remove any blockage.
2. Ensure Proper Assembly – Make sure the legs and wheels are correctly inserted into the main body. The wheels should be facing outward.
3. Adjust Wheel Locks – Some models have adjustable rear wheels for different resistance levels. Check if the wheel lock is engaged and adjust it if necessary.
4. Tighten or Loosen Screws – If the wheel is too tight or stuck, try loosening the screw slightly. If it is loose, tighten it to ensure proper movement.
5. Test Movement – After making adjustments, push the walker to see if the wheel turns properly.
If the issue persists, refer to the product manual for further troubleshooting.
This answer is automatically generated