Table of Contents
Advertisement
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product's warranty, please call VTech
at 1-800-
®
521-2010 in the U.S. or 1-877-352-8697 in Canada.
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Sit-to-Stand Learning Walker and is the answer not in the manual?
Questions and answers
One of the back wheels will not turn to adjust speed level. How can I fix that?
To fix a back wheel that will not turn on the VTech Sit-to-Stand Learning Walker, follow these steps:
1. Check for Obstructions – Inspect the wheel for any debris, hair, or dust that may be preventing it from turning. Remove any blockage.
2. Ensure Proper Assembly – Make sure the legs and wheels are correctly inserted into the main body. The wheels should be facing outward.
3. Adjust Wheel Locks – Some models have adjustable rear wheels for different resistance levels. Check if the wheel lock is engaged and adjust it if necessary.
4. Tighten or Loosen Screws – If the wheel is too tight or stuck, try loosening the screw slightly. If it is loose, tighten it to ensure proper movement.
5. Test Movement – After making adjustments, push the walker to see if the wheel turns properly.
If the issue persists, refer to the product manual for further troubleshooting.
This answer is automatically generated