2. Set-up
• Date/Time and Time Difference
Sets the required area information for the Send E-mail
function.
The time of day when email is sent from the scanner is
included in the header of that email message as the trans-
mission time. Perform the following procedure in order to set
the date and time in your area, as well as the time difference
to GMT (Greenwich Mean Time).
Press the default ( ) key. The Default Setting screen
1
will appear.
Touch the "Machine default" key. The Machine
2
Default screen will appear.
Use the "L" and "M" cursor keys to select "Time
3
difference" and then touch the "Change #" key. The
Time Difference Setting screen will appear.
Use the "+" and "–" keys to change the setting as
4
desired. Touch the "Close" key to register the change
to that setting.
2-6
Use the "L" and "M" cursor keys to select "Date/
5
Time" and then touch the "Change #" key. The Date/
Time Setting screen will appear.
Use the "+" and "–" keys to change the setting as
6
desired. Touch the "Close" key to register the change
to that setting.
* Be sure to set the time difference first and then the
date and time.
* If you change both of "Summertime" and "Date/
Time" setting, "Summertime" setting will be invalid.