How To Handle Paper Jam At Saddle Stitcher - Kyocera KM-4230 Instruction Handbook Manual

Troubleshooting
D. How to handle paper jam at saddle stitcher
When a message of saddle stitcher jam displays at front panel,
follow below procedure.
1. Hold the part of the finisher shown in the below illustration, and
release the finisher from the machine body.
2. Open front lower cover.
3. Turn the knob at the right side.
4. Turn the knob at the left side by pressing it while turning.
5. Remove the jam paper.
6. Remove the jam paper at the entrance guide section.
- 11 -