Verifying System Requirements; System Requirements - Sharp MX-M700U Software Setup Manual

VERIFYING SYSTEM REQUIREMENTS

SYSTEM REQUIREMENTS

Before installing the software described in this manual, make sure that your computer satisfies the following requirements.
*1
Operating system
Computer type
Display
Other hardware requirements
*1 Printing is not possible in MS-DOS mode.
*2 USB is not supported.
*3 The machine's USB 2.0 port will transfer data at the speed specified by the USB2.0 (Hi-Speed) standard only if the
Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP
that Microsoft provides through "Windows Update" is installed.
*4 Compatible with models preinstalled with Windows 98, Windows Me, Windows 2000 Professional, Windows XP
Professional, Windows XP Home Edition, Windows 2000 Server, or Windows Server 2003, and which are equipped
standard with a USB interface.
*5 Cannot be used when the machine is connected with a USB cable. The PC-Fax driver cannot be used.
For users of Windows NT 4.0
The CD-ROM does not include software for Windows NT 4.0.
Contact your dealer or nearest authorized service representative if you want software for Windows NT 4.0.
Windows 98, Windows Me,
Windows NT Workstation 4.0 (Service Pack 5 or later)*
Windows 2000 Professional, Windows XP Professional,
Windows XP Home Edition, Windows 2000 Server,
Windows Server 2003
IBM PC/AT compatible computer
Equipped with a 10Base-T/100Base-TX LAN board or
equipped standard with a USB 2.0
800 x 600 resolution (SVGA) with 256 colors or higher
(32,000 colors (16 bit) or higher is recommended)
An environment that allows any of the above operating
systems to fully operate.
Windows
*3 *4
/1.1 port.
Macintosh*
Mac OS 9.0 to 9.2.2,
2
, Mac OS X v10.1.5,
Mac OS X v10.2.8,
Mac OS X v10.3.9,
Mac OS X v10.4 to 10.4.8
An environment in which any
of the operating systems
listed above can fully operate
(including Macintosh
computers with an Intel
processor).
5
5