Sharp MX-M700U Software Setup Manual page 37

10
Select the PPD file.
(1) Click the PPD file for your model.
(2) Click the [Select] button.
• If the above dialog box does not appear and you
return to the "Chooser" dialog box, follow these
steps to select the PPD file manually.
(1) Make sure that the machine is selected in the
"Select a PostScript Printer" list, and then click
the [Setup] button followed by the [Select PPD]
button.
(2) Select the PPD file for your model and click the
[Open] button.
(3) Click the [OK] button.
• The PPD file is installed in the [Printer Descriptions]
folder in the [Extensions] folder.
11
Make sure that the machine is selected
in the "Select a PostScript Printer" list
and then click the [Setup] button.
12
Click the [Configure] button.
To automatically configure the settings based on the
installed machine options that are detected, click the
[Auto Setup] button.
13
Select the machine configuration.
(1)
(2)
(1) Select the options that are installed on
the machine.
(2) Click the [OK] button.
You can check the options that are installed on the
machine by printing out the "All custom setting list" in
the system settings. Follow these steps to print out the
"All custom setting list": Press the [SYSTEM
SETTINGS] key, touch the [LIST PRINT] key, and
then touch the [ALL CUSTOM SETTING LIST] key.
14
Click the [OK] button in the window of
step 12 to close the window.
15
Click the close box (
"Chooser".
This completes the configuration of the printer
driver.
Installing the screen fonts
The screen fonts for Mac OS 9.0 - 9.2.2 are contained in
the [Font] folder of the "PRINTER UTILITIES" CD-ROM
that accompanies the PS3 expansion kit. Copy the fonts
that you wish to install to the [System Folder] of the
startup disk.
If you experience problems that may be due to the
installed screen fonts, immediately delete the installed
fonts from the system.
MAC OS 9.0 - 9.2.2
(1)
(2)
) to close the
35