Sharp MX-M700U Software Setup Manual page 33

+
14
Configure the printer driver.
• The procedure for configuring the printer driver varies depending on the operating system version. The procedure for versions
10.4 - 10.4.8 and the procedure for other versions are explained separately below.
• The machine can print using the IPP function. If you wish to use the IPP function, see "Printing using the IPP function" (page
33) to configure the printer driver settings.
v10.4 - 10.4.8
(1) Click the [Default Browser] icon.
If multiple AppleTalk zones are displayed, select the
zone that includes the printer from the menu.
(2) Click the machine's model name.
• The machine's model name usually appears as
[SCxxxxxx]. ("xxxxxx" is a sequence of
characters that varies depending on your model.)
• The PPD file of the machine is automatically
selected.
(3) Make sure that the PPD file of your
model is selected.
(4) Click the [Add] button.
The PPD file of the machine is automatically
selected and the peripheral devices installed on the
machine are detected and automatically configured.
The PPD file is installed in the following folders on the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj]
If you are using Mac OS X v10.1.5, this completes the configuration of the printer driver. If you are using a
version other than Mac OS X v10.1.5, go to the next step.
v10.1.5, v10.2.8, v10.3.9
(1)
(2)
(1) Select [AppleTalk].
(3)
If multiple AppleTalk zones are displayed, select the
zone that includes the printer from the menu.
(4)
(2) Click the machine's model name.
The machine's model name usually appears as
[SCxxxxxx]. ("xxxxxx" is a sequence of characters
that varies depending on your model.)
(3) Select the PPD file of the machine.
• If you are using Mac OS X v10.1.5, select [Other].
• If you are using Mac OS X v10.2.8, select [Sharp]
• If you are using Mac OS X v10.3.9, select [Auto
(4) Click the [Add] button.
If you are using Mac OS X v10.3.9, the PPD file of
the machine is automatically selected and the
peripheral devices installed on the machine are
detected and automatically configured.
The PPD file selection window will appear. Click
[Startup disk name] - [Library] - [Printers] - [PPDs]
- [Contents] - [Resources] - [en.lproj] - "PPD file
for your model", and then click the [Choose]
button.
and click the PPD file of your model.
Select].
MAC OS X
(1)
(2)
(3)
(4)
31