HP Vectra VEC 7 Installation Manual page 11

8 Accept the default products by pressing Enter, and then press "F10" to
continue.
9 Select 16-bit LAN Drivers and hit the Enter key.
10 Page down the Board Drivers list to "USER SPECIFIED 16 BIT DRIVER"
and hit enter.
11 Insert the 3COM Etherlink 3C590 Ethernet card and drivers disk, set the
path to "A:\NETWARE\CLIENT\" and press enter.
12 Select "3Com Fast Etherlink / Etherlink III Bus Master Family" and press
enter.
13 Accept the default settings, press "F10" to continue, and verify the
following entries for the "Installation Configuration Summary":
YES
C:\NOVELL\CLIENT32
C:\WINDOWS
16-bit LAN drivers
3Com Fast Etherlink / Etherlink III Bus Master Family
14 Press "F10" to save and continue.
15 When prompted, insert the corresponding disks to complete file transfer
and driver installation.
16 When the install utility is finished, press <CRTL><ALT><DEL> to restart
the machine.
17 After Windows loads, open the "NETWORK" folder, double-click the
"NETWORK SETUP" icon.
18 Select "Networks" and verify that "Novell Netware (Workstation Shell 4.0
and above)" is selected under "Install Windows support for the following
network only:"
19 Select "OK" twice, and the installation is complete.
2 Connecting to a Netware 4.11 Server
Windows for Workgroups