If Your Pc Does Not Start Properly - HP Kayak XM600 User Manual

Hide thumbs Also See for Kayak XM600:
Table of Contents

Advertisement

3 Troubleshooting Your HP PC Workstation

If Your PC Does Not Start Properly

Check that...
The PC's power cord is correctly connected.
Check that...
The internal hardware components are correctly installed.
An on-screen error message or a beep sequence when the PC starts up means there is a configuration problem with your PC.
The part of your configuration for which the Power-On Self Test has
detected an error.
The PC's power indicator light works but the monitor remains blank.
Check that...
The monitor is switched ON (LED is on).
The monitor's power cord is correctly connected.
The monitor's brightness and contrast settings are
correctly set.
You see an image during boot but then the screen goes blank
Check that...
The monitor settings in your PC are compatible with
your monitor.
If Your PC Does Not Start Properly
The PC Doesn't Power On
The Power Button LED Flashes RED
The Power-On Self Test Results In an Error
The PC Doesn't Start and Makes a Noise or Beeps
Check that...
If Your PC Has a Hardware Problem
50
Connect the power cord to a working grounded power outlet and the PC.
Refer to the Troubleshooting Guide available from HP's web site at:
www.hp.com/go/kayaksupport
Refer to the Troubleshooting Guide available from HP's web
site at:
The Monitor Doesn't Work...
Refer to the monitor manual for an explanation of the LED signals (green,
orange, or blinking).
Connect the power cord – ensure it is plugged into a working grounded power
outlet and into the monitor.
Check the settings using the monitor's OSD (on-screen display) or using
controls on the front of the monitor.
Windows NT: Enter VGA mode when prompted during start-up, then
reset the resolution.
Windows 95/98: Restart the PC. When the HP screen is displayed, press
F8 and then start the PC in safe mode. Double-click on the Display icon
in your PC's Control Panel
sliding control to reset the resolution.
How
How
How
www.hp.com/go/kayaksupport
How
How
then click on the Settings button. Use the
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm600 - kayak - 128 mb ram

Table of Contents