WARNING
Installation Tools
1
Setting Up and Using Your
PC Workstation
If you are in any doubt that you can lift the PC Workstation and monitor
safely, do not try to move them without help.
1
When you receive your PC Workstation, unpack all of the components.
Place the PC Workstation on a sturdy desk with easily accessible power
2
outlets and enough space for the keyboard, mouse, and any other
accessories.
3
Position the PC Workstation so that its rear connectors are easily
accessible.
No tools are required to install your PC Workstation. However, if you plan to
install a disk drive or an accessory board inside your PC Workstation, you
will need a flat-blade screwdriver. For more information on installing
accessories, refer to "Installing and Replacing Hardware Parts in Your
PC Workstation", on page 21.