The SCSI ID is usually configured with jumpers on the SCSI hard disk drive.
Refer to the installation guide supplied with the drive for information on
selecting a SCSI ID.
Some internal SCSI disk drives may have termination resistors that must be
removed or disabled before installation in your PC Workstation. Refer to
the drive's installation guide for more details and to see if there is a special
installation procedure to follow.
Power Connectors
2 Installing and Replacing Hardware Parts in Your PC Workstation
Power Cable for 3.5-inch Floppy
Disk Drive
Power Cables for Hard Disk Drives, Zip
Drives, Tape Drives, CD-RW,
CD-ROM Drives and DVD drives
Installing Mass Storage Devices
33