Installing An Agp Card; Removing The Agp Card From The Retention Mechanism; Removing The Agp Card - Intel BOXD850MVSE Product Manual

Intel Desktop Boards D850MD and D850MV Product Guide

Installing an AGP Card

Follow these instructions to install an AGP card:
1. Place the AGP card in the AGP connector.
2. Press down on the card until it is completely seated in the AGP connector and the card
retention notch snaps into place around the AGP card RM pin.
3. Secure the card's metal bracket to the chassis back panel with a screw.

Removing the AGP Card from the Retention Mechanism

Follow these instructions to remove an AGP card from the AGP card RM:
1. Remove the screw (B) that secures the card's metal bracket (A) to the chassis back panel.
2. Push back on the RM lever (D), as shown in Figure 16, until the retention pin (C) completely
clears the notch in the card.
3. Pull the card straight up (E).
A
34
B
E
C
D
Figure 16. Removing the AGP Card
OM10595