Installing An Agp Card - Intel D850EMD2 Quick Reference

3. Insert the bottom edge of the RIMM into the socket.
4. When the RIMM is inserted, push down on the top edge of the RIMM until
the retaining clips snap into place. Make sure the clips are firmly in place.

5 Installing an AGP Card

✏
NOTE
The desktop boards D850EMD2 and D850EMV2 are only compatible with
1.5 V AGP cards.
The desktop boards D850EMD2 and D850EMV2 have an integrated AGP
retention mechanism. Follow these instructions to install an AGP card:
1. Place the AGP card in the AGP connector.
2. Press down on the card until it is completely seated in the AGP connector
and the card retention notch snaps into place around the AGP card RM pin.
3. Secure the card's metal bracket to the chassis back panel with a screw.
To remove the AGP card, push back on the RM lever (A) until the retention pin
completely clears the notch in the card.
Intel Desktop Boards D850EMD2 and D850EMV2
Quick Reference
0
1
OM13624
A
OM13851
9