Primary/Secondary Ide Master/Slave Submenus - Intel BOXD850EMD2L - 850E 478PIN MAX-2GB UATX 3PCI Specifications

4.4.4.1

Primary/Secondary IDE Master/Slave Submenus

To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the
master or slave to be configured.
Maintenance
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 72 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 72. Primary/Secondary IDE Master/Slave Submenus
Feature
Drive Installed
Type
Maximum Capacity
LBA Mode Control
Multi-Sector Transfers
Main
Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
Video Configuration
Options
No options
• None
• User
• Auto (default)
• CD-ROM
• ATAPI Removable
• Other ATAPI
• IDE Removable
No options
• Disabled (default)
• Enabled
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
Security Power
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills in capabilities from ATA/ATAPI devices.
Displays the capacity of the drive.
Enables or disables LBA mode control.
Specifies the number of sectors per block for transfers
from the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
BIOS Setup Program
Boot Exit
continued
105