1.10.1 Audio Connectors
1.10.1.1
Front Panel Audio Connector
A 2 x 5-pin connector provides mic in and line out signals for front panel audio connectors.
For information about
The location of the connector
The signal names of the front panel audio connector
✏
NOTE
The front panel audio connector is alternately used as a jumper block for routing audio signals.
Refer to Section 2.9.1 on page 74 for more information.
1.10.1.2
Auxiliary Line In Connector
A 1 x 4–pin ATAPI-style connector connects the left and right channel signals of an internal audio
device to the audio subsystem.
For information about
The location of the auxiliary line in connector
The signal names of the auxiliary line in connector
1.10.1.3
ATAPI CD-ROM Audio Connector
A 1 x 4–pin ATAPI-style connector connects an internal ATAPI CD-ROM drive to the audio
mixer.
For information about
The location of the ATAPI CD-ROM connector
The signal names of the ATAPI CD-ROM connector
1.10.2 Audio Subsystem Software
Audio software and drivers are available from Intel's World Wide Web site.
For information about
Obtaining audio software and drivers
Product Description
Refer to
Section 2.8.3, page 70
Table 44, page 71
Refer to
Figure 13, page 58
Table 29, page 59
Refer to
Figure 13, page 58
Table 30, page 59
Refer to
Section 1.3, page 18
33