Boot Configuration Submenu - Intel BOXD850EMD2L - 850E 478PIN MAX-2GB UATX 3PCI Specifications

4.4.2 Boot Configuration Submenu

To access this submenu, select Advanced on the menu bar and then Boot Configuration.
Maintenance
The submenu represented by Table 69 is for setting Plug and Play options, resetting configuration
data, and setting the power-on state of the Numlock key.
Table 69.

Boot Configuration Submenu

Feature
Plug & Play O/S
Reset Config Data
Numlock
ISA Enable Bit
Main
Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
Options Description
• No (default)
Specifies if manual configuration is desired.
• Yes
No lets the BIOS configure all devices. This setting is
appropriate when using a Plug and Play operating system.
Yes lets the operating system configure Plug and Play
devices that are not required to boot the system. This option
is available for use during lab testing.
• No (default)
No does not clear the PCI/Plug and Play configuration data
stored in flash memory on the next boot.
• Yes
Yes clears the PCI/Plug and Play configuration data stored
in flash memory on the next boot.
• Off
Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.
• On (default)
• Enabled
When set to Enable, a PCI-to-PCI bridge will only recognize
(default) I/O addresses that do not alias to an ISA range (within the
bridge's assigned I/O range).
• Disabled
Security Power
BIOS Setup Program
Boot Exit
101