Primary/Secondary Ide Master/Slave Submenus - Intel D845EPI Product Manual

Intel Desktop Board D845EPI Product Guide

Primary/Secondary IDE Master/Slave Submenus

Main Advanced
` [
:
Type
Maximum Capacity
Configuration Options
Selected By BIOS
LBA Mode :
Block Mode :
PIO Mode :
Ultra DMA :
Cable Detected
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 19 shows the format of these IDE submenus. For brevity, only one example is shown.
Table 19.

Primary/Secondary IDE Master/Slave Submenus

Feature
Drive Installed
Type
Maximum Capacity
LBA Mode Control
(Note)
Block Mode
60
Security Power
Xxxxxxxxx
[Auto]
[Auto]
[Supported]
16 Sectors
Auto
Disabled
: Serial
Options
None
• Auto (default)
• User
None
None
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
Boot Exit
]
m o
n p
Enter
F1
P9
F10
ESC
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
Specifies LBA mode control.
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
Select Screen
Select Item
Select ` Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
continued