Download Print this page

Whirlpool WGD8300SB Use And Care Manual page 65

Electronic gas dryer

Advertisement

Cycle Complete
This light illuminates when a drying cycle is finished. If the
WRINKLE SHIELD
TM
feature has been selected, the WRINKLE
SHIELD
TM
feature indicator light will also be illuminated.
The Cycle Complete light turns off I hour after the end of a drying
cycle (including the WRINKLE SHIELD
TM
cycle of 90 minutes),
when Pause/Cancel is pressed, or when the door is opened.
WRINKLE
SHIELD
TM
Feature
The WRINKLE SHIELD
TM
feature light illuminates when this
option is selected. This indicator stays on with the Cycle
Complete light.
Indicator
lights
Other indicator lights on the control panel show when Cycle,
Temp Adjust, and End of Cycle settings are selected.
Select the drying cycle that matches the type of load you are
drying. See Auto Preset or Manual Preset Cycle Settings charts,
HEAVY
cASU T'
DELICATEf1...--..._
SUPER/_"_
XTOUCH
DELICATE/ //_
\'_ _UP
DAMPI I( \\
_\
/I
}QUICK
DRYt tt
_._
X))
/DRY
k \\
"_
x/' /TIMED
Cycle Control knob
Auto Cycles
Auto Cycles allow you to match the cycle to the load you are
drying, See the following Auto Preset Cycle Settings chart, Each
cycle dries certain fabrics at the recommended
temperature.
A
sensor detects the moisture in the load and automatically
adjusts
the drying time for optimal drying,
Heavy Duty
Use this cycle to get High heat for heavyweight
mixed loads,
cotton towels or jeans.
Normal
Use this cycle to get Medium heat for drying mixed loads and
sturdy fabrics such as work clothes.
Casual
Use this cycle to get Low heat for drying no-iron fabrics such as
sport shirts, casual business clothes and permanent press
blends.
Delicate
Use this cycle to get Low heat for drying synthetic fabrics,
washable knit fabrics and no-iron finishes.
Super Delicate
Use this cycle to get Extra Low heat to gently dry items such as
lingerie, exercise wear or sheer curtains.
Damp Dry
Use this cycle to dry items to a damp level using Low heat, or to
dry items that do not require an entire drying cycle, Damp dry
items such as jeans (to avoid stiffness) or cotton clothing (to
make ironing easier). The temperature
setting on this cycle
cannot be adjusted. Items will have different levels of dampness.
At the end of this cycle, clothes will be damp.
Auto Preset Cycle Settings
Auto Cycles
Temp.
Time*
Load Type
(Minutes)
HEAVY DUTY
High
40
Heavyweight mixed loads,
cotton towels, jeans
NORMAL
Medium
35
Mixed loads, corduroys, work
clothes, sheets
CASUAL
Low
35
Permanent press, synthetics
DELICATE
Low
30
Lightweight
items, blouses,
synthetics
SUPER DELICATE
Extra Low
25
Lingerie
DAMP DRY
Low
20
Clothes to come out suitable
for ironing
*Estimated Time with Auto DRYNESS (Normal) setting.
Time will vary depending
on load type and load size,
Manual Cycles
Use Manual Cycles to select a specific amount of drying time and
a drying temperature.
When a Manual Cycle is selected, the
ESTIMATED TIME REMAINING display shows the actual time
remaining in your cycle, You can change the actual time in the
cycle by pressing TIMING Up or Down.
Timed Dry
Use this cycle to complete drying if items are still damp after an
Auto Cycle, Timed Dry is also useful for drying heavyweight
and
bulky items such as bedspreads and work clothes,
Quick Dry
Use this cycle for drying small loads or loads that need a short
drying time.
Touch Up
Use this setting to help smooth out wrinkles from such items as
clothes packed in a suitcase or items wrinkled from being left in
the dryer too long.
Manual
Preset Cycle Settings
Manual Cycles
Temp.
Default Time
Load Type
(Minutes)
TIMED DRY
High*
40
Heavyweight,
bulky items,
bedspreads, work clothes
QUICK DRY
Medium
27
Small loads
TOUCH UP
Medium
20
Helps smooth out wrinkles
*The Timed Dry cycle will default to the last temperature
used for
Timed Dry.
17

Advertisement

loading