To insert a CD into the CD-ROM drive
1. Press OPEN to open the disk cover.
2. Place a CD (with the label facing up) on the center spindle, and press down
firmly on the center of the CD until it seats on the spindle.
3. Close the disk cover.
The following messages appear on the display readout.
Message/Indication
-AUDIO DISC ONLY-
BATTERY
BUSY
no dISC
on
OPEN
1-12
Description
Displayed when you press an audio control button while a data CD is in
the CD-ROM drive.
Displayed to indicate low battery power.
Displayed when CD-ROM drive is transferring data to the OmniBook.
Displayed when there is no disk in the CD-ROM drive.
Displayed if a data CD is present. During inspection of a new disk (data or
audio), the "on" message blinks.
Displayed when the disk cover is open.
Disk Cover
Center Spindle
CD