To Play An Audio Cd - HP OmniBook 800 User Manual

To play an audio CD

Before playing an audio CD, make sure the volume control is set to below 4 to avoid
overly loud output.
1. Insert the CD into the CD-ROM drive, label side up.
2. Close the disk cover.
3. Press the Start/Pause button.
The display indicates both the current track number and how long that track has
been playing (elapsed time).
The table below describes the CD-ROM drive audio control buttons.
Button Function
Start/Pause Press and release to start playing or pause a CD.
Forward Skip Press and release to skip to the next track.
Press and hold to continue skipping tracks.
Reverse Skip Press and release to return to the beginning of the current track or to the previous
track if the elapsed time readout is at 00:00.
Press and hold to continue skipping tracks in reverse.
Stop Press and release to stop playing a CD.
OPEN
Start/Pause
1-14
Stop
Reverse Skip
Forward Skip
VOLUME