Using A Modem Through The Expansion Base - HP Compaq NX9100 Reference Manual

Using a Modem Through the
Expansion Base
You can connect your notebook through the Expansion Base
to your analog telephone line for dial-up communication.
This requires the RJ-11 modem cables that came with your
Expansion Base.
1. Plug one end of one of the modem cables into the RJ-11 jack
on the notebook. Plug the other end of the cable into the
RJ-11 jack on the upper rear panel of the Expansion Base 1.
2. Plug one end of the other RJ-11 cable into the RJ-11 jack on
the lower rear panel of the Expansion Base. Plug the other
end of the cable into the RJ-11 wall jack 2.
Connecting a modem through the Expansion Base
Reference Guide
A country-specific modem adapter also may be required in
addition to the RJ-11 cable connected to the RJ-11 wall jack.
Using the Expansion Base
3–9