Names of Parts
Touch Panel (Front)
Left unit
Bottom unit
■
Attaching the Velcro strip to the touch pen
•
Prepare the below included accessories
Touch pen
•
Touch Pen
Attach the Velcro strip to the touch panel
so as to hold the touch pen.
■
Note on attaching the included spacer to the pedestal
To use the plasma display with the below pedestal models, install the spacer included with the touch panel
on the pole of the pedestal as shown.
Applicable pedestals: [TY-ST08-K] [TY-ST08-S]
Spacer
Pole
Set the spacer over the pole.
Top unit
Right unit
Velcro strip (with white backing)
Peel off the backing from the
Velcro strip.
Touch pen
Slide the spacer in the direction
of the arrow.
Touch Panel (Rear)
USB port
Wrap the Velcro strip around the
center of the touch pen.
Velcro strip
(with yellow backing)
Lock the spacer to the pole
using the included screws
(25 mm in length).
7