Setting Sensor Position - Panasonic TY-TP50P10S - Touch-screen - Wired Operating Instructions Manual

Setting Sensor Position

Set the sensor position of the touch panel so that it corresponds to the position of the display.
Note
If the touch panel is rotated before the sensor position is set, the touch direction and the direction in which the
cursor moves will differ. Set the sensor position before rotating and using the touch panel.
Start up the setup panel. (p. 20)
Click on the "Basic setting" tab.
Click this button.
Click on the "Direction setting" tab.
Select the sensor position for the plasma display.
Horizontal
Touch Panel Setup
Vertical
39