Calibration
If the touch position and cursor position do not match, the touch panel can be calibrated so that they do.
Notes
•
If connecting multiple touch panels to a single computer in a multiple monitor environment, see "Multiple Monitor
Setup". (p. 35)
•
Use only the touch pen included with this touch panel. Operation is not guaranteed with other products.
Start up the setup panel. (p. 20)
Touch the center of the highlighted marker with the touch pen and keep pointing on it.
Two seconds later, the coordinates are automatically entered and the next marker is highlighted.
After touching all of the markers, the below message appears.
Click on the "Basic setting" tab.
Click this button.
Highlighted marker
Click on the "OK" button.
"OK" is entered automatically 10 seconds later if nothing is
done. Touching the message window stops the count. This
lets you check whether the touch panel has been properly
calibrated or not.
Touch Panel Setup
•
Once you touch X, you can
also cancel or save the
settings using the keyboard.
27