Connecting A Cable Box; Connecting Other Video Equipment - Go-Video DV1030 User Manual

Connecting a Cable Box

How to connect
<Converter Box> <Rear Panel of DVD+VCR>
DVD + VCR
VIDEO VIDEO 1
IN OUT IN
R
AUDIO
OUT
L
VIDEO
<A/B Switch>
<Splitter (Not supported)>
RF Cable
OUT
IN
OUT
RF Cable
If your cable system only requires you to use a converter box for some channels
(i.e., pay-TV channels), follow these steps: Find the primary incoming RF cable. Plug this cable into a splitter
(available at your local electronics store.) Connect one RF cable between one OUT terminal on the splitter and
the IN terminal on the converter box.
Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal on an A/B
switch (available at your local electronics store.) Connect a third RF cable between the OUT terminal on the
converter box and the B-IN terminal on the A/B switch.
Connect an RF cable between the OUT terminal on the A/B switch and the ANT. IN jack on your DVD+VCR.
When the A/B switch is in the B position, use the converter box to change channels ; when the A/B switch is in
the A position, use the DVD+VCR to change channels.
How to watch regular TV and record Cable TV
1
1
Set Channel Select switch of Converter Box to CH 3 or 4 as same as video exclusive channel. Press [SET]
button in [VCR] operation to change the RF Output channel in the "CHANNEL SET" menu.
2
2
Select the channel to be recorded on the Converter Box. In this case, if you want to watch the show that is
recording, press [TV/INPUT] button on your TV to select "Out (VCR)".
3 3
Press the [REC] button on the DVD+VCR.
4
4
To watch regular TV, select the desired channel on your TV.
12
<Rear Panel of TV>
INPUT 1 INPUT 2
IN
(FROM ANT.)
RF
OUT
ANT IN
(TO TV)
RF Cable
AUDIO/VIDEO Cable
<Cable Antenna>

Connecting Other Video Equipment

You can connect a wide variety of audio/video equipment to your DVD+VCR, including : an additional VCR,
Laser Disc Player, DVD Player, Camcorder, Satellite Receiver, or Video Game. Since all of these devices use
essentially the same connections, they will be described together.
How to Connect
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PRESONNEL.
20 19 21 18 16 12 14 17 10 13 15 11 4 5 3 7 8 9 3 6 1
Playback VCR,
Camcorder,
AUDIO
Satellite
Receiver ...
AUDIO/VIDEO Cable
...
VIDEO
...
1
1
Connect Audio/Video Out jack on your other video equipment to Audio/Video In jack on rear panel (or front
panel) of DVD+VCR with audio/video cable.
2
2
Connect "ANT. IN" jack on TV to "RF.OUT" jack on DVD+VCR with RF cable.
3
3
To record contents of other video equipment with DVD+VCR, insert a tape with the record safety tab intact
in DVD+VCR.
How to Copy (Edit) Tape with Other Video Equipment
1 1
Turn on DVD+VCR.
2
2
Press [INPUT] and adjust DVD+VCR to display "External Input 1" or "External Input 2" on TV screen.
3
3
Press [PLAY] on other video equipment.
4 4
Press [REC] on DVD+VCR if you want to record contents of other video equipment.
5
5
Press [Pause] on DVD+VCR when unnecessary or undesired scene is displayed in recording.
(Caution) Recording is stopped automatically after 5 minutes in Pause mode. Press the [REC] button
again if you want to resume recording.
DVD ONLY DVD + VCR
IN
VIDEO VIDEO 1
AUDIO COMPONENT (FROM ANT.)
OUT IN
OUT VIDEO OUT
Y
R R
AUDIO
Pr
RF
OUT
L S-VIDEO OUT L (TO TV)
COAXIAL
Pb
DIGITAL
VIDEO
AUDIO OUT
RF Cable
13