Dvd Playback; Vcr Playback - Go-Video DV1030 User Manual

DVD Playback

1
1 Press [POWER] to power on.
Press [DVD] to select DVD mode.
2
2
Press [EJECT] to open the disc tray.
Place your disc firmly on the disc tray, with the label facing upward.
3
3
Insert the disc and press [EJECT] to close the tray.
The disc tray is closed and after checking the disc's condition, many discs will
PREV NEXT
start playback automatically.
4
4
To start playback, press [PLAY/PAUSE].
• In the case of DVD,
DVD menus and titles are often displayed on screen.
• In the case of S-VCD and VCD2.0:
The disc menus are displayed on screen and are converted into PBC
(Playback Back Control) mode.
• In the case of CD, VCD1.1 and MP3:
The disc plays in order of its track numbers.
5
5
To stop playback, press [ ].
To pause, press [PLAY/PAUSE] during playback.
If you press no Press [PLAY/PAUSE] again to resume playback.
button in 5 minutes
after you are opened
6
6
Press [EJECT] to remove the disc.
the tray, the player
closes the tray
automatically to
prevent from damage.
Various Playback Methods
For fast (or reverse) playback, press [√ √ √ √ ] or [œ œ œ œ ] in Playback mode.
* Unavailable during MP3 playback and with certain DVDs.
For slow (or reverse) playback, press [√ √ √ √ ] or [œ œ œ œ ] in Pause mode.
* Not available during VCD playback. The
For still picture, press [PAUSE] in Playback mode.
18
mark will appear.

VCR Playback

1
1 Press [POWER] to power on.
Press [VCR] to select VCR mode.
2
2 Insert the desired tape.
3
3
To start playback, press [PLAY/PAUSE].
When the picture is flickering or poor, adjust it with the [TRACKING +/–]
buttons.
PREV NEXT
4
4
To stop playback, press [ ].
For pause, press [PLAY/PAUSE] in playback mode.
Press [PLAY/PAUSE] again to resume playback.
5
5 Press [EJECT] to remove the tape.
Various Playback Methods
For fast forward (or reverse) playback, press [√ √ √ √ ] or [œ œ œ œ ] in Playback mode.
For Still picture, press [PLAY/PAUSE] in Playback mode.
For slow-motion playback, press [√ √ √ √ ] in Pause mode.
* NOTE: The VCR does not have Slow Reverse Playback.
For Frame Advance, press [NEXT
button, the picture advances one frame.
To Adjust Display
If the VCR detects
This product includes automatic Tracking so you can enjoy a clear picture without
contaminated
additional operation. However:
head(s), it shows an
on-screen message to
- If the screen is poor in Playback mode,
bring this to your
- If noises occur in the upper or lower part of the screen in slow playback mode,
attention.
* If you see this
- If paused picture vibrates up and down.
message, clean the
Then try using the [TRACKING +/–] buttons to adjust the display manually.
video heads with a
commercial head-
cleaner.
] in Pause mode. Each time you press this
19