RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note to CATV system installer: This reminder is provided to call CATV system installer's attention to Article 820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.
Ventilation-Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
Number Player Region Number Both the DVD player and DVD discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this player is inscribed on the rear panel of the player.
FRONT PANEL DISPLAY DVD+VCR BUTTON CHANNEL SETUP BUTTON LINE IN 2 COMPOSITE VIDEO JACK LINE IN 2 LEFT AUDIO JACK LINE IN 2 RIGHT AUDIO JACK DV2130 EJECT SETUP LINE IN 2 L - AUDIO -R 15 16 17 18 ...
Rear Panel 1 2 3 S-VIDEO OUT DIGITAL AUDIO OUT(COAXIAL) DIGITAL AUDIO OUT(OPTICAL) COMPONENT VIDEO OUT AUDIO LINE OUT TO TV (FOR USE WITH S-VIDEO OR COMPONENT) Front Panel Display DVD deck is active. DVD or CD is loaded. Time, counter position or current deck status. VHS videotape is loaded.
Remote Control POWER TRACK- AUTO SHUTTLE 3D SOUND 100+ SELECT AUDIO TV MUTE STOP PLAY/PAUSE ENTER SP/SLP SUBTITLE MODE LAST CH REPEAT Insert Batteries into Remote • Remove the battery cover on the remote. • Insert two 1.5V “ ” batteries as shown, making sure of the correct polarities (+/-).
Using the TV Buttons on the Remote Control POWER EJECT TRACK- AUTO TRACK+ SHUTTLE 3D SOUND TV/VCR 100+ SELECT AUDIO DISPLAY TV MUTE STOP PLAY/PAUSE ENTER SP/SLP CLEAR DISC MENU SUBTITLE MODE ANGLE MARK LAST CH REPEAT TIMER SEARCH/IDX Your VCR remote control will operate many brands of television. To determine whether your television is compatible, follow the instructions below.
Basic Connections/Auto Setup You will need to connect the DVD+VCR to a TV and run Auto Setup. Auto Setup will automatically search for channels and then set your DVD+VCR's internal clock. NOTES: • See Appendix A for Advanced Connections. • In order to view the DVD+VCR setup menu, you must use either the Standard RF or Line connection between your TV and DVD+VCR, even if you use the S-Video or Component Video Output for improved picture quality.
Deck Control Buttons POWER EJECT TRACK- AUTO TRACK+ SHUTTLE 3D SOUND TV/VCR 100+ SELECT AUDIO DISPLAY TV MUTE STOP PLAY/PAUSE Basic DVD Operation EJECT EJECT AUTO TRACK+ COPY SHUTTLE TV/VCR STOP PLAY/PAUSE POWER PLAY The DVD+VCR uses one set of controls to operate both decks. POWER Button Press the POWER button on the remote control or front panel to turn on the DVD+VCR.
Additional VCR Options • See pages 52~54 for special VCR Playback features. • See pages 55~57 for VCR Recording features. • See page 58 for Timer Recording features. DV2130 EJECT DVD VCR SETUP LINE IN 2 L - AUDIO -R...
Basic TV Tuner Operation TRACK- AUTO TRACK+ SHUTTLE 3D SOUND TV/VCR 100+ SELECT 3D SOUND TV/VCR 100+ SELECT AUDIO DISPLAY TV MUTE STOP PLAY/PAUSE On-Screen Menu Navigation Language : English Front Display : Auto ENTER SP/SLP CLEAR DISC MENU Use the following buttons when watching TV with the DVD+VCR's built-in TV tuner.
Menu Language To change the on-screen menu language to English, French or Spanish: Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop or Play mode. Select “SETUP” Use the buttons to highlight “SETUP”, then press ENTER to select.
Manual Clock Set ENTER SP/SLP CLEAR DISC MENU Language : English Front Display : Auto Language : English Front Display : Auto Language : English Front Display : Auto If Auto Setup fails to set the DVD+VCR’s internal clock by locating a local TV station, follow these steps to set the date and time manually.
Tuner Band Setting This feature allows you to manually set the DVD+VCR’s tuner band to Antenna or Cable, whichever you connected to the IN (FROM ANT.) jack during initial setup. • Use this setting only if Auto Setup detected the incorrect tuner band, i.e.
RF Output Channel ENTER SP/SLP CLEAR DISC MENU Language : English Front Display : Auto Language : English Front Display : Auto Language : English Front Display : Auto Ant./Cable : Antenna RF Output CH : 4CH Auto Channel Memory Channel Add/Delete Open “Initial Setup”...
Auto Channel Memory Auto Channel Memory will automatically seek and store all active channels in your area. Open “Initial Setup” menu With the DVD in Stop or Play mode, press the SETUP button. Select “SETUP” Use the buttons to highlight “SETUP”, then press ENTER to select.
Channel Add/Delete ENTER Language : English Front Display : Auto Language : English Front Display : Auto Language : English Front Display : Auto Ant./Cable : Antenna RF Output CH : 3CH Auto Channel Memory Channel Add/Delete CHANNEL ADD/DELETE Select channel : [ 02] ...
Front Panel Dimmer You can set the Front Panel Display to be bright all the time, dim all the time, or dim when the power is off. Open “Initial Setup” menu With the DVD in Stop or Play mode, press the SETUP button. Select “SETUP”...
Disc Menu Language To set your preferred language (if available) for disc menus: Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode. Select “DVD” Use the buttons to highlight “DVD”, then press ENTER to select.
Audio Language To set your preferred language (if available) for DVD audio tracks: Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode. Select “DVD” Use the buttons to highlight “DVD”, then press the ENTER button.
Subtitle Language Subtitle Language Automatic Subtitle To set your preferred language (if available) for Subtitles: Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode. Select “DVD” Use the buttons to highlight “DVD”, then press ENTER to select.
Digital Output If your A/V receiver is equipped with a Dolby Digital decoder, your DVD+VCR can output Dolby Digital 5.1 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers. NOTE: Select “Bitstream” ONLY if you have connected a Dolby Digital-equipped A/V receiver to the Digital Output (optical or coaxial) on the DVD+VCR back panel.
Language : English Front Display : Auto PCM Down Sampling : On If your A/V receiver is equipped with a DTS decoder, your DVD+VCR can output DTS digital sound, but you MUST enable this feature in the menu system. NOTE: Select “On” ONLY if you have connected a DTS-equipped A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on the DVD+VCR back panel.
Dynamic Compression Dynamic Compression restrains the dynamic range of sound, i.e. the difference between the loudest and quietest passages of a DVD audio track. Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode. Select “DVD” Use the ...
PCM Down Sampling Language : English Front Display : Auto PCM Down Sampling : On If your amplifier is not capable of reproducing a 96kHz signal, PCM downsampling should be set to On. Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode. Select “DVD”...
TV Aspect Ratio Set the aspect ratio (length x width) of your TV screen so the DVD player will display movies at the appropriate size for your television. Choose from standard, letterbox, or widescreen format. Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode. Select “DVD”...
Black Level Language : English Front Display : Auto Display Setup The Black Level feature adjusts the reference level of black in the video signal to one of two choices: • Off - Standard NTSC black level. Yields consistent contrast through all sources.
S-VIDEO OUT or COMPONENT VIDEO OUT jacks. • Use the S-Video or Component Video connection method for the DVD player ONLY. The TV tuner and VCR can still be viewed through the RF or line outputs. Open “Initial Setup” menu Press the SETUP button while the DVD is in Stop mode.
Parental Rating Control is a password-protected system that allows you to block playback of DVDs based on their content. The system uses an eight level rating system. • If you try to play a DVD that exceeds the selected rating, an error message will appear.
A/V Receiver Connections To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD+VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. Before You Begin... •...
Special Playback Features AUDIO DISPLAY TV MUTE STOP PLAY/PAUSE TV MUTE STOP PLAY/PAUSE ENTER STOP PLAY/PAUSE ENTER STOP PLAY/PAUSE ENTER During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the PLAY/PAUSE ll button.
Disc Menu Navigation Many DVDs feature their own menu systems, where you can select titles, chapters, audio tracks, subtitles, and special disc features, such as movie trailers, and information about the cast. Use these buttons to make selections in the disc menus: DISC MENU Press to access the DVD’s disc menu, if available.
Title/Chapter/Time Selection To view the current title, chapter/track, and counter position, press the DISPLAY button during DVD playback. The DISPLAY screen can also be used to quickly choose a title, chapter/track, or playing time. View the Display During DVD/CD playback, press the DISPLAY button on the remote control.
Page 39
To access the desired title when there is more than one on the disc. For example, if there is more than one movie on a Title DVD, each movie will have its own title. Most DVD discs are recorded in chapters so you can quickly Chapter find a specific passage.
Angle View ENTER SP/SLP CLEAR DISC MENU SUBTITLE MODE ANGLE MARK LAST CH REPEAT TIMER SEARCH/IDX Some DVD movies offer multiple camera angles during playback. To activate this feature press the ANGLE Button. Check for the Angle Icon The Angle Icon (shown above) will appear on screen when a DVD contains multiple angles.
Subtitle Some DVDs provide subtitles in one or more languages. You can use the SUBTITLE button to quickly view and change settings. Open Subtitle Menu During playback, press the SUBTITLE button. Set Subtitle Language ¦ / Use the buttons to select from the available subtitle languages.
A-B Repeat ENTER SP/SLP CLEAR DISC MENU SUBTITLE MODE ANGLE MARK LAST CH REPEAT TIMER SEARCH/IDX Chapter Title A - B Track Disc A - B The A-B Repeat feature enables you to repeat a segment of a DVD or CD. Simply mark the starting point (A) and ending point (B) of the segment you want to watch.
Repeat Chapter/Title To repeat a single chapter or a complete title: Open Repeat Menu Press the REPEAT button while in Play mode to open the Repeat menu. • The current Repeat mode will be highlighted. Select “Chapter” ¦ / Use the buttons to select “Chapter”.
Bookmarks ENTER SP/SLP CLEAR DISC MENU SUBTITLE MODE ANGLE MARK LAST CH REPEAT TIMER SEARCH/IDX – – – – CLEAR Up to three Bookmarks can be inserted for a given DVD, allowing you to quickly jump to your favorite scene or song. Open Bookmark Menu During playback, press the MARK button on the remote control.
MP3/WMA Playback When an MP3/WMA Disc is inserted into the DVD player, the first song file in the first folder begins playing automatically. • If more than two file extensions are present, select the media of your choice. • To change the currently playing media, press the STOP ■ button twice and then press the DISC MENU button.
Page 46
(registered trademark of Microsoft, Inc.) and SDMI The SDMI Foundation). You cannot copy such files. • Important: The above recommendations cannot be taken as a guarantee that the DVD player will play all MP3 recordings, or as an assurance of sound quality.
Program Play & Random Play Program Play (CD/MP3/WMA) With the MP3 in Stop mode, press the MODE button. ¦ / Use the buttons to select PROGRAM. Press the ENTER button. ¦ / Use the buttons to select the first track to add to the program.
Picture CD Playback ALBUM PHOTO: 1 /215 PHOTO: 1 /215 PHOTO: 1 /215 PHOTO: 1 /215 RETURN TIMER: RETURN ➢ • Press the RETURN button to return to the Album Screen. • Press the RETURN button to return to the slide show. •...
Page 49
Picture CD Playback About CD-R JPEG Discs • Only files with the ".jpg" and ".JPG" extensions can be played. • If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. •...
3D Sound TRACK- AUTO TRACK+ SHUTTLE 3D SOUND TV/VCR 100+ SELECT The 3D Sound function is a sound enhancement mode that lets you enjoy virtual surround sound with only two speakers. Press the “3D SOUND” button During playback, press the “3D SOUND” button on the remote control.
- Special DVD Features Highlight “Special DVD Features”, then press the ENTER button. Special DVD Features The DV2130 incorporates two innovative features that will enhance your DVD playback experience: EZ-Play Tired of wading through confusing and inconsistent menus upon loading...
Special VCR Playback Features PLAY 0:00:00 Press the DISPLAY button to see the current status of the VCR deck, as well as the tape counter position and record speed. SHUTTLE 3D SOUND TV/VCR 100+ SELECT AUDIO DISPLAY TV MUTE STOP PLAY/PAUSE ENTER SP/SLP...
Auto Play If you want your videotapes to play automatically when you insert them, turn on Auto Play. NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted. Open “Initial Setup” menu With the DVD in Stop or Play mode, press the SETUP button. Select “VCR”...
Variable Search System Return to Blank Search Forward Reverse SP/SLP CLEAR DISC MENU SUBTITLE MODE ANGLE MARK LAST CH REPEAT TIMER SEARCH/IDX When VHS playback is stopped, press the SEARCH/IDX button to display a list of search options. The DVD+VCR uses the VISS (VHS Index Search System) standard to locate index marks placed at the start of all video recordings.
Press the REC button on the remote control or front panel. For options while recording is in progress, see “Special Recording Features” on the next page. ➢ To record from the DVD player to the VCR use the COPY button. It is not permissible to copy Macrovision-encoded DVDs. ...
One-Touch Recording (OTR) One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 9 hours and 30 minutes at the touch of a button. Start Recording Follow the instructions on page 55 to begin recording. Activate OTR While in Record mode, press the REC button again to activate One-Touch Recording (OTR).
How to Set a Timer Recording Language : English Front Display : Auto Timer Program If you want to set the timer program, press the ENTER key Start Date Speed Insert a blank videotape into the VCR deck. Be sure to leave the Record Safety Tab intact.
Function (VCR) Use the Function menu as a shortcut to a variety of VCR functions. Open “Initial Setup” menu With the DVD in Stop or Play mode, press the SETUP button. Select “FUNCTION” Use the buttons to highlight “FUNC” then press ENTER to select.
S-Video/Component Video Connections (for DVD) To S-Video Input on Your TV To Component Video Input on Your TV To Left/Right Audio Inputs on Your TV If your TV is equipped with S-Video or Component Video inputs, you can enjoy superior video quality when watching DVDs on your DVD+VCR.
Stereo Connections You can connect your DVD+VCR to your home stereo system or stereo TV and enjoy stereo sound when watching a movie or TV. Connect DVD+VCR to Stereo Using RCA cables, connect the Line Out Left and Right Audio jacks on the back panel of the DVD+VCR to the Auxiliary Inputs on your stereo receiver.
Monitor TV Connections To Monitor TV Audio/Video Inputs 3D SOUND TV/VCR 100+ SELECT AUDIO DISPLAY TV MUTE Monitor-style televisions offer improved sound and picture quality over regular televisions because they receive the audio and video signals directly from the DVD+VCR through the line inputs. NOTE: A monitor television is not the same as a computer monitor.
Connecting Other Video Equipment You can connect a wide variety of audio/video equipment to your DVD+VCR, including: • An additional VCR or DVD Player • Laser Disc Player • Camcorder • Satellite Receiver • Video Game Since all of these devices use essentially the same connections, they will be described together.
Technical Specifications AUDIO Inputs VIDEO AUDIO AUDIO (DVD only) VIDEO Outputs VIDEO (DVD only) VIDEO SYSTEM AUDIO TRACK PLAY/RECORD TIME FF/REW TIME HEADS WOW & FLUTTER FREQ. RESPONSE DISC COMPATIBILITY FREQ. RESPONSE S/N RATIO DYNAMIC RANGE POWER REQUIREMENT ENVIRONMENT SYSTEM WEIGHT 2 Stereo audio inputs, RCA Connector, -8dbm, 47KΩ, front and rear...
LIMITED WARRANTY GOVIDEO DVD+VCR LIMITED WARRANTY Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor DVD+VCR service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. The DVD+VCR remote year parts control is warranted for 90 days from the date of purchase.