Connecting A Cable Box - Go-Video DV1030A User Manual

C
ONNECTING A
How to connect
Cable Box/
Satellite Receiver
Cable Antenna
IN
RF Cable
OUT
1
Connect the RF cable from the cable wall outlet to the RF In jack on your Cable Box.
2
Connect a second RF cable from the RF Out jack on the Cable Box to the IN (FROM ANT.) jack
on the back panel of the DVD+VCR.
3
Connect the supplied RF cable from the OUT (TO TV) jack on the back panel of the DVD+VCR
to your television's Antenna In jack. Or for improved picture and sound quality, connect an
audio/video cable from the Audio/Video Out jacks on the DVD+VCR to the Audio/Video In jacks
on your TV.
4
Connect the DVD+VCR power cord to a standard wall outlet.
5
Power on the DVD+VCR, TV, and Cable Box.
6
If you are using the RF connection, set your TV to Channel 3 or 4 to view the DVD+VCR. If you
are using the Audio/Video connection, set your TV to its line input to view the DVD+VCR.
How to watch regular TV and record Cable TV
1
Set the Channel Select switch on your cable Box to CH 3. If Channel 3 is used by a local TV
station, you must change it to Channel 4.
2
Select the channel to be recorded on the Cable Box.
3
Press the [REC] button on the DVD+VCR.
4
To watch regular TV while you record from cable, press the [TV/VCR] button on the DVD+VCR
and select the desired channel on your TV. Because of the nature of cable boxes, you cannot
watch one Cable TV channel and record another at the same time.
C B
ABLE OX
Rear Panel of DVD+VCR Rear Panel of TV
DVD + VCR
IN
VIDEO VIDEO 1
(FROM ANT.)
OUT IN
R
AUDIO
RF
ANT IN
L
VIDEO
OUT
(TO TV)
RF Cable
INPUT 1 INPUT 2
AUDIO/VIDEO Cable
13