Memorizing Tv Channels - Go-Video DV1030 User Manual

Memorizing TV Channels

To Automatically Memorize Channels
1
1
Press [SETUP].
Press [ ] to move
then press [ENTER].
2
2
Select "AUTO CHANNEL SEARCH".
Press [ENTER] to select AUTO CHANNEL
SEARCH.
Select "Detect Automatically".
Press [ENTER] to detect the channel
automatically.
The DVD+VCR searches for all available
channels. When this process is complete, the
lowest channel found is displayed.
3
3 Check memorized channels.
To check the memorized channels, press [CH+/–] on the remote control.
To Memorize Channels Manually
To add or remove channels manually:
1
1
Press [SETUP] and select "CHANNEL
SET".
Select "Add/Remove Channels".
2
2
Select the desired channel and memorize it.
Use the [0-9] buttons to select the desired
channel.
When [>] is pressed, "REMOVED" under the
channel number changes to "ADDED".
3
3
Check the memorized channel.
To check the memorized channel, press [CH+/–] on the remote control.
20
SETUP
CLOCK SET
to CHANNEL SET, and TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
AUTO CHANNEL SEARCH
What type of signal are you
using?
Cable TV
Antenna
Detect Automatically
AUTO CHANNEL SEARCH
Now scanning channel 11
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
ADD/REMOVE CHANNELS
Channel 02
is now ADDED.
To Delete Channels Manually
To delete memorized channels:
1
1
Press [SETUP] and select "CHANNEL SET".
Select "Add/Remove Channels".
2
2
Select the desired channel and delete it.
Use the [0-9] buttons to select the desired channel to delete.
When [<] is pressed, "ADDED" under the channel number changes to "REMOVED".
3
3
To check the deleted channel, press [CH+/–] on the remote control.
Selecting cable or antenna viewing
To change between Antenna and Cable TV:
To set the signal type:
Press [ENTER] to toggle the setting between CABLE and
ANTENNA in the CHANNEL SET screen.
When the desired signal type is displayed, press [SETUP]
twice to exit.
To Set Cable Box
1
1
Press [SETUP] and select "CHANNEL
SET".
Select "Cable Box Setup".
2
2
Select "Cable Box Channel".
Enter the channel number which matches to the
output of the Cable Box.
To Set Output Channel
Press [SETUP] and select "CHANNEL SET".
Select "Channel Change".
Press [ENTER] to set the RF Output channel to CH3 or
CH4.
Memorizing TV Channels
ADD/REMOVE CHANNELS
Channel 02
is now REMOVED.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
CABLE BOX SETUP
On what channel do you
want to receive from
the cable box?
- -
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
21