Dvd Playback - Go-Video VR2945 User Manual

DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지38

DVD Playback

DVD Playback
Playing a DVD
1
Press the [DVD] button to set the remote control to operate the DVD deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.
2
Press [EJECT] to open the disc tray.
3
Load your disc in the tray with the playback side down (label side up).
4
Press [EJECT] to close the tray.
5
READING appears on the front panel display, and playback starts automatically. If playback does not start,
press [PLAY (√)]. In some cases, the Disc menu might appear instead.
Playing a DVD+R (+RW)
When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel
displays on the screen.
If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu.
Select a title to play then press [ENTER].
If a Disc menu is displayed
• A Disc menu may be displayed when you load a DVD. Use the [
want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.
• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must
be entered and/or the disc must be authorized; see 'Set Parental Level' on page 30.
• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region
code for this DVD Recorder+VCR is 1 (one).
• Unless stated otherwise, all operations described below use the remote control. Some features may also be
available in the Setup menu.
• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.
• A disc which is recorded with unauthorized movie material may not be played.
• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.
Still Picture and Frame-by-Frame Playback
1
Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.
2
You can back up or advance the picture frame-by-frame by pressing [FF (√ √)] repeatedly during Pause
mode.
Fast Forward/Backward
1
Press [REW (œ œ)] or [FF (√ √)] during playback. The DVD Recorder+VCR will go into Search mode.
2
Press [REW] or [FF] to select the desired speed: √ √ X2, √ √ X4, √ √ X8, √ √ X16, √ √ X32, √ (forward) or
œ, œ œ X2, œ œ X4, œ œ X8, œ œ X16, œ œ X32 (backward).
38
œ √...† ] buttons to select the title/chapter you