Edimax Wireless LAN Access Point User Manual page 25

Key 1 -
Key 4
Default
Key
Click Apply button at the bottom of the screen to save the
above configurations. You can now configure other advanc e
sections or start using the Access Point.
802.1x
IEEE 802.1x is an authentication protoc ol. Every user mus t
use a valid account to login to this Access Point before
accessing the wireless LAN. T he authenticati on is process ed
by a RADIU S ser ver. You can us e an exter nal RADIUS s er ver
or use the RADIUS s erver built-in with the Access Point. This
mode onl y authenticates us er by IEEE 802.1x, but it does not
encr yption the data during communic ation.
The WEP keys are us ed to encr ypt data
transmitted in the wireless networ k. Fill the text
box by following the r ules below.
64-bit WEP: input 10-digit Hex values (in the
"A-F", "a-f" and "0-9" range) or 5-digit ASCII
character as the encr yption keys.
128-bit WEP: i nput 26-digit Hex values (in the
"A-F", "a-f" and "0-9" range) or 13-digit ASCII
characters as the encr yption keys.
Select one of the four keys to encrypt your
data. Only the key you selec t it in the "Default
key" will take effec t.
W ireless L AN AP Configuration
23