Edimax Wireless LAN Access Point User Manual page 10

1c) W indows NT
1. Click the Start button and sel ect Setti ngs, then clic k
Control Panel. The Control Panel wi ndow will appear.
2. Double-clic k Network ic on. T he N etwork window will
appear. Sel ect the Protocol tab from the Network window.
3. Chec k if the TCP/IP Protocol is on your list of Netw ork
Protoc ols. If TCP/IP is not installed, click the Add button
to install it now. If TCP/IP is installed, go to step 5.
4. In the Select Network Protoc ol window, sel ect the
TCP/IP Protoc ol and clic k the Ok
installing the TCP/IP protocol. You may need your
Windows CD to
5. After you ins tall TCP/IP, go bac k to the Network window.
Select TCP/IP from the list of Netw ork Protocols and
then click the Properties button.
6. Chec k each of the tabs and verify the following settings:
IP Address: Sel ect Specify an IP address. Specify the
IP Address and Subnet M as k as following example.
IP Address: 192.168.2.3 (any IP address within
192.168.2.2~192.168.2.254 is available, do not setup
192.168.2.1)
Subnet Mas k: 255.255.255.0
• DNS: Let all fields are bl ank.
• W INS: Let all fields are bl ank.
• Routing: Let all fields are blank.
7. Click OK to c onfirm the setting. Your PC will now have
the IP Address you specified.
2. Enter 192.168.2.1 from Web Browser to get into the
Access Point's c onfigurati on tool.
3. A screen will be popped up and reques t you to enter user
name and password. T he default us er name and
pass word is as follows.
W ireless L AN AP Configuration
c omplete the ins tallati on.
User Nam e: Adm in
Password: 1234
8
button to start