Edimax Wireless LAN Access Point User Manual page 18

MAC
Address
Associated
Clients
Click Apply button at the bottom of the screen to save the
above configurations. You can now configure other advanc e
sections or start using the Access Point.
Active W ireless Client Table
"Active Wireless Client T able" rec ords the s tatus of all ac tive
wireless stations that are c onnecting to the access poi nt. You
can lookup the MAC Address, N umber of Transmitted Pac kets,
Number of Recei ved Pac kets and Encr yption Status of eac h
active wireless client in this tabl e.
W ireless L AN AP Configuration
If you want to bridge more than one wired
Ether net networks together with wirel ess
LAN, you have to set this access point to
"AP Bridge-Point to Poi nt mode", "AP
Bridge-Point to Multi-Poi nt mode" or "AP
Bridge-WDS mode". You have to enter the
MAC address es of other access poi nts that
join the bridging wor k.
Click "Show Acti ve Clients" button, then an
"Active Wireless Client T able" will pop up.
You c an see the status of all acti ve wireless
stations that are c onnecting to the access
point.
16