Add MAC
address into the
table
Remove MAC
address from the
table
Reset
Click Apply button at the bottom of the screen to save the
above configurations. You can now configure other advanc e
sections or start using the Access Point.
W ireless L AN AP Configuration
In the bottom "New" area, fill in the
"MAC Address" and "Comment" of the
wireless station to be added and then
click "Add". Then this wireless station
will be added into the "MAC Address
Filtering Table" above. If you find any
typo before adding it and want to retype
again. Jus t click "Clear" and both "MAC
Address" and "Comment" fiel ds will be
cleared.
If you want to remove some MAC
address from the "MAC Address
Filtering Table", selec t the MAC
address es you want to remove in the
table and then click "Delete Sel ected". If
you want remove all MAC addresses
from the table, j ust clic k "Delete All"
button.
Click "Reset" will clear your current
selections.
34