Configuring The Access Poi Nt; Status And Information; Wireless Setting - Edimax Wireless LAN Access Point User Manual

3.2 C onf ig ur in g th e Access Point
3.2.1 St atu s and Info r mation
On this screen, you c an s ee the general information of the
Access Point i ncludi ng Alias Name, Firmware Version, ESSID,
Channel Number, Status, IP Address, MAC Address, etc.
3.2. 2 W ir eless S et t in g
This Access Point supports AP, Station, Bridge and WDS
modes. "AP Mode" provi des pure access point func tion. The
simplest way to build up a wireless LAN is to us e "AP Mode".
"Station Mode" provides the function to connec t to other AP
without bridge functi on. "AP Bridge M ode" provides the
functi on to bridge more than 2 wired Ethernet networks
together by wireless LAN. You can us e two acc ess points with
"AP Bridge-Point to Poi nt mode" to bridge two wired Ethernet
networ ks together. If you want to bridge mor e than two wired
Ether net networks together, you have to use enough access
points with "AP Bridge-Point
W ireless L AN AP Configuration
to Multi-Point mode". An
10