Unpacking Your Ice Maker; Connecting Your Ice Maker; Cleaning And Maintaining Your Ice Maker - EdgeStar IP210SS Owner's Manual

UNPACKING YOUR ICE MAKER
1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is 1. Remove the exterior and interior packaging. Check that ice basket and ice scoop is
included. If any parts are missing, please contact customer service. included. If any parts are missing, please contact customer service.
2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean 2. Clean the interior with lukewarm water and a soft cloth. Take out the ice basket and clean
it . it .
3. Find a location for your ice maker that is protected from direct sunlight and other sources 3. Find a location for your ice maker that is protected from direct sunlight and other sources
of heat (e.g., stove, furnace, radiator). Place the ice maker on a level surface. Maker sure of heat (e.g., stove, furnace, radiator). Place the ice maker on a level surface. Maker sure
that there is at least 5 inches of space between the back and sides of your ice maker and that there is at least 5 inches of space between the back and sides of your ice maker and
the wall. the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging ice maker in. 4. Allow one hour for the refrigerant fluid to settle before plugging ice maker in.
5. The appliance must be positioned so that the plug is accessible. 5. The appliance must be positioned so that the plug is accessible.
CONNECTING YOUR ICE MAKER
* Improper use of the grounded plug can result in the risk of electrical shock. If the * Improper use of the grounded plug can result in the risk of electrical shock. If the
power cord is damaged please call customer service. power cord is damaged please call customer service.
1. This unit should be properly grounded for your safety. The power cord of this appliance is 1. This unit should be properly grounded for your safety. The power cord of this appliance is
equipped with a three­prong plug which mates with standard three prong wall outlets to equipped with a three­prong plug which mates with standard three prong wall outlets to
minimize the possibility of electric shock. minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not 2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not
under any circumstances, cut or remove the third (ground) prong from the power cord. Any under any circumstances, cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified questions concerning power and/or grounding should be directed toward a certified
electrician. electrician.
3. This appliance requires a standard 110~120 volt, 60Hz electrical outlet with three­prong 3. This appliance requires a standard 110~120 volt, 60Hz electrical outlet with three­prong
ground. ground.
CLEANING AND MAINTAINING YOUR ICE MAKER
Before using your ice maker, it is strongly recommended to clean it thoroughly. Before using your ice maker, it is strongly recommended to clean it thoroughly.
1. Take out the ice basket. 1. Take out the ice basket.
2. Clean the interior with diluted detergent, warm water and a soft cloth. 2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. The outside of the ice maker should be cleaned regularly with a mild detergent solution 3. The outside of the ice maker should be cleaned regularly with a mild detergent solution
and warm water. and warm water.
4. Dry the interior and exterior with a soft cloth. 4. Dry the interior and exterior with a soft cloth.
5. When the machine is not in use, open the water drain cap to completely drain the water 5. When the machine is not in use, open the water drain cap to completely drain the water
reservoir. reservoir.
!
4
DANGER DANGER