ATI Technologies X1900GT - Radeon 256MB Pcie User Manual page 83

3
Adjust the Adaptive Anti-Aliasing control slider to the desired
setting.
Set Catalyst™ A.I. settings
1
From the Tree View pane, expand 3D.
2
Click Catalyst™ A.I.
3
If necessary, clear the check mark from Disable Catalyst™ A.I.
4
Click and drag to slider to the desired setting.
Note: Change to Catalyst™ A.I. settings is not shown in the 3D
Preview.
Apply your settings
1
Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2
Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Note: Clicking Discard applies to all features of an aspect, not just
the feature in the current view.
Change motherboard BIOS settings
Some motherboards may have a system BIOS option to switch between
single or dual PCIe™ slot support. The default setting may be single slot
support.
Refer to the motherboard's manual for information to enable dual PCIe™
slot support.
For more information see the CrossFire™ Web page at:
ati.com/crossfire
VPU Recover 75