ATI Technologies X1900GT - Radeon 256MB Pcie User Manual page 55

2
Select Catalyst™ A.I.
3
Select Disable Catalyst™ A.I. to place a check mark in the check
box.
Set Catalyst™ A.I. settings
1
From the Tree View pane, expand 3D.
2
Click Catalyst™ A.I.
3
If necessary, clear the check mark from Disable Catalyst™ A.I.
4
Click and drag to slider to the desired setting.
Note: Change to Catalyst™ A.I. settings is not shown in the 3D
Preview.
Preview your changes
• The preview image automatically displays your adjustments.
Optionally, double-click 3D Preview for a full-screen view of the
adjustments you have made. To exit full-screen Preview, press the Esc
key.
The Preview can be disabled by clicking the "X" button in the
Preview pane. It can also be paused by clicking the "||" button in the
Preview pane. Clicking the pause button again causes the preview to
resume.
Note: 3D Preview is not available for systems with integrated
graphics on the motherboard.
Apply your settings
1
Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2
Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Catalyst™ A.I. 47