ATI Technologies X1900GT - Radeon 256MB Pcie User Manual page 49

3
If necessary, remove the check mark from Use custom settings.
4
Click and drag the Control slider to the left to select High or Optimal
Performance, or to the right to select High or Optimal Quality.
Preview your changes
• The preview image automatically displays your adjustments.
Optionally, double-click 3D Preview for a full-screen view of the
adjustments you have made. To exit full-screen Preview, press the Esc
key.
The Preview can be disabled by clicking the "X" button in the
Preview pane. It can also be paused by clicking the "||" button in the
Preview pane. Clicking the pause button again causes the preview to
resume.
Note: 3D Preview is not available for systems with integrated
graphics on the motherboard.
Apply your settings
1
Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2
Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Note: Clicking Discard applies to all features of an aspect, not just
the feature in the current view.
Restore default settings
1
Move the mouse to the bottom right-hand corner of the window.
2
Click Defaults.
Note: Clicking Defaults will restore the defaults for the current view
only. Previous settings are not altered and will be saved once you
click OK.
Standard Settings 41