Table of Contents
Advertisement
CHAPTER 7:
CrossFire™ FAQ
The following is a listing of frequently-asked questions about CrossFire™.
For the latest information, please consult the CrossFire™ Web site at:
ati.com/crossfire
1
What combination of products are required to build a working
CrossFire™ system?
Three components are required:
• a CrossFire™ Edition graphics card that works as the Master
graphics card.
• a CrossFire™ Ready graphics card from the same brand-family
that works as the Slave graphics card.
• a CrossFire™ Ready motherboard (which contains two PCIe™
X16 slots).
More information on the requirements for each of these components
can be found within this FAQ.
2
What graphics cards work with CrossFire™?
A CrossFire™ graphics card works with all members of the same
brand-family. Thus a Radeon® X1800 CrossFire™ Edition can be
used as the Master graphics card with any Radeon® X1800 product.
3
What motherboards support CrossFire™?
The optimal configuration for a CrossFire™ system is one based on a
Radeon® Xpress 200 CrossFire™ Edition motherboard.
Motherboards from other manufactures will be certified as
CrossFire™ Ready when they become available.
4
Are there specific CMOS motherboard settings for CrossFire™?
On some motherboards, the CMOS may be set by default to support
only a single PCI Express® X16 slot. Ensure that both PCIe™ X16
slots are enabled in the CMOS.
5
Which slot does the CrossFire™ Master card go into on the
motherboard?
101
Advertisement
Table of Contents
