3D Client Is Active; Crossfire™ Is Currently Unavailable; Disabling Crossfire - ATI Technologies X1800 - 100-435705 Radeon XT 512MB GDDR3 SDRAM PCI Express x16 Graphics Card User Manual

92 Enable CrossFire™
For more information see the CrossFire™ Web page at:
ati.com/crossfire

3D client is active

You will not be able to start CrossFire™ if a 3D application, game, or video
playback, such as a DVD movie, is running.
Close all open 3D applications, games, and movie player applications then
enable CrossFire™.
For more information see the CrossFire™ Web page at:
ati.com/crossfire
CrossFire™ Is Currently Unavailable
This error is occurred because CrossFire™ did not correctly detect your
graphics hardware or their is a problem with the software.
• Check the graphics card are installed correctly.
• Check the interconnect cable is installed correctly.
• Close all running 3D applications.
• Re-install the CATALYST™ Control Center. For information on
installing the software see the Getting Started Guide that came with
your graphics card.
For more information see the CrossFire™ Web page at:
ati.com/crossfire

Disabling CrossFire™

When CrossFire™ is disabled you will need to restore your graphics
settings. It is recommended that you create a Profile that contains all your
settings.
For more information see the CrossFire™ Web page at:
ati.com/crossfire
Create a profile
A profile can be created from any aspect of Catalyst™ Control Center.
1
Make customized changes by adjusting the various sliders and buttons
for the aspects to be included in your profile.
2
Open the Profiles Manager.