CHAPTER 8:
CrossFire
The following are frequently-asked questions about CrossFire
For the latest information, please consult the CrossFire
ati.com/crossfire
1
What combination of products are required to build a working
™
CrossFire
Three components are required:
• a CrossFire
graphics card.
• a CrossFire
that works as the Slave graphics card.
• a CrossFire
X16 slots).
More information on the requirements for each of these components
can be found within this FAQ.
2
What graphics cards work with CrossFire
A CrossFire
brand-family. Thus a Radeon
as the Master graphics card with any member of the Radeon
family.
3
What motherboards support CrossFire
Any certified CrossFire
chipsets.
4
Are there specific CMOS motherboard settings for CrossFire
On some motherboards, the CMOS may be set by default to support
only a single PCI Express
slots are enabled in the CMOS.
™
FAQ
system?
™
Edition graphics card that works as the Master
™
Ready graphics card from the same brand-family
™
Ready motherboard (which contains two PCIe
™
graphics card works with all members of the same
®
™
motherboards based on Intel
®
X16 slot. Ensure that both PCIe
™
?
™
X1800 CrossFire
™
?
43
™
.
™
Web site at:
™
Edition can be used
®
X1800
®
and ATI
™
?
™
X16