Crossfire™ Graphics Card Connections - ATI Technologies X1800 - 100-435705 Radeon XT 512MB GDDR3 SDRAM PCI Express x16 Graphics Card User Manual

90 Enable CrossFire™
2
Click Adaptive Anti-Aliasing.
3
Adjust the Adaptive Anti-Aliasing control slider to the desired
setting.
Set Catalyst™ A.I. settings
1
Expand 3D in Advanced View.
2
Click Catalyst™ A.I.
3
If necessary, clear the check mark from Disable Catalyst™ A.I.
4
Click and drag to slider to the desired setting.
Apply your settings
1
Click Apply to save your changes and leave the Catalyst™ Control
Center open.
2
Click OK to save your changes and exit the Catalyst™ Control
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst™ Control Center was
opened or the last time Apply was used. Discard does not close the
Catalyst™ Control Center.
Clicking Discard applies to all features of an aspect, not just the feature in
the current view.
Change motherboard BIOS settings
Some motherboards may have a system BIOS option to switch between
single or dual PCIe™ slot support. The default setting may be single slot
support.
Refer to the motherboard's manual for information to enable dual PCIe™
slot support.
For more information see the CrossFire™ Web page at:
ati.com/crossfire
CrossFire™ graphics card connections
In order for CrossFire™ to function the interconnect cable must be
correctly connected to both the Master and Slave graphics cards.