Drive Mode: Continuous Shooting And Exposure - Canon 4374B001 Instruction Manual

appears when you turn on the video flash light (n ON). For details
about using the video flash light, refer to the instruction manual of the
VFL-2.
NOTES
• The flash will not fire in the following cases:
- When the flash mode is set to [U Automatic] or [V Red-Eye Auto]
and you manually adjust the exposure.
- During auto exposure bracketing.
- When the flash mode is set to [U Automatic] or [V Red-Eye Auto]
and the recording program is set to [q Night Scene].
- When using an optional video light.
• About the AF-Assist Lamp: While you press j halfway, if the sur-
roundings of the subject are too dark, the mini video light may pop up
and the assist lamp may light up briefly in order to enable the camcorder
to focus more accurately (AF-assist lamp).
- You can also set 8
lamp is not activated.
- The camcorder may not be able to focus even if the AF-assist lamp is
on.
• The practical range of the flash is approx. 1 to 2 m. The practical range
with the VFL-2 attached is approx. 1 to 4 m. In any case, the actual
range will depend on the recording conditions.
• The range of the flash decreases in continuous shooting mode.
• For red-eye reduction to be effective, the subject needs to look at the
assist lamp. The degree of reduction depends on the distance and on
each individual.
• The flash mode cannot be selected when the exposure is locked.
• We recommend not using the flash while the optional Wide-converter or
Tele-converter is attached; its shadow can appear on the screen.
Drive Mode: Continuous Shooting and Exposure Bracketing
Take a series of photos of a moving subject or record the same picture
in 3 levels of exposure in order to choose later the photo you like the
best.
Operating modes:
108
Photos
8
[AF-Assist Lamp] to [B Off] so the assist