Using Headphones - Canon 4374B001 Instruction Manual

NOTES
• When the audio level meter reaches the red point (0 dB), the sound may
be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the 7
ting (or [Surround Mic Attenuator] when the optional SM-V1 Surround
Microphone is attached to the camcorder).
• We recommend using headphones to check the sound level while
adjusting the audio recording level or when the microphone attenuator
is activated.
• This function can also be assigned to the custom key/dial (

Using Headphones

Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/X terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to X (headphones) output.
Operating modes:
* Headphones can be used also in
not be changed in this mode. Change the setting in advance in one of the other
operating modes.
[FUNC.]*
[Headphones]
To close the menu:
To continue adjusting the volume:
8 8
[f]
the volume bar to adjust the volume
* Only when performing the procedure in
• J appears.
*
8 8
[MENU]
8
8
8
[Volume]
8
[Microphone Attenuator] set-
mode but the function of the terminal can-
8
6
[AV/Headphones]
[a]
Drag your finger left and right along
8
mode.
0 85).
8
[a]
Video
81