Drive Mode: Continuous Shooting And Exposure Bracketing - Canon HF10 Instruction Manual

Drive Mode: Continuous Shooting and
Exposure Bracketing
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose
later the picture you like the best.
POINTS TO CHECK
Select a recording mode other than
[ FIREWORKS].
Options
[ SINGLE]
Records a single still image.
[ CONT.SHOOT.] (Continuous Shooting),
[ HISPEED CONT.SHOOT. ]
(High-Speed Continuous Shooting)
Captures a series of still images as long as you
hold pressed down. For the number of
PHOTO
shots per second, refer to the sidebar on page 61
(refer to the sidebar below).
Maximum number of continuous shots
Number of shots per second
Normal speed
High speed
Using the flash
These figures are approximate and vary with the recording conditions and subjects.
The actual number of frames per second will be lower when the shutter speed is 1/25 or
slower.
FUNC.
(
( 22)
Default value
1 Press
2 Press
2.5 frames
4.1 frames
1.7 frames
[ AEB] (Auto Exposure Bracketing)
The camcorder records a still image in three
different exposures (dark, normal, light in 1/2 EV
steps), allowing you to choose the shot you like
the best.
24)
FUNC.
[ SINGLE]
Desired option
FUNC.
C S
ONTINUOUS HOOTING
H -S C
IGH PEED ONTINUOUS
PHOTO
halfway to activate
the autofocus.
PHOTO
fully and hold it
pressed down.
A series of still images will be
recorded as long as you hold the
button pressed.
Maximum number of continuous shots
60 images
/
S
HOOTING
61