Canon 4374B001 Instruction Manual page 145

2 Open the [For Web Upload] index screen on memory card Y.
[b]
3 Connect the camcorder to the computer using the supplied USB
cable.
• Connection D. Refer to Connection Diagrams (
• If the device type selection screen appears, touch [Computer/
Printer].
• On the computer, ImageMixer 3 SE will start up automatically and the
startup screen (ImageMixer 3 Launcher) will appear.
4 Click [Web upload] and continue the operation on the computer
following the software's indications.
See also 'ImageMixer 3 SE Software Guide' (PDF file).
IMPORTANT
• While the camcorder is connected to the computer, do not open the
double memory card slot cover and do not remove the memory cards.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the compact power adapter or turn off the
camcorder or the computer.
Uploading your Videos Wirelessly
If you are using an Eye-Fi card, you can automatically upload the mov-
ies from the [For Web Upload] index screen to your favorite video shar-
ing Web site. You will need to have installed the software supplied with
your Eye-Fi card and completed all the required configuration setup in
advance. Refer to the instruction manual of the Eye-Fi card.
Please read the IMPORTANT section (
card.
1 Insert your Eye-Fi card into memory card slot Y and make sure
there is sufficient available space on the memory card.
8 8
7
[SD Scenes]
8
[For Web (MPEG-2)]
0
0
146) before using an Eye-Fi
External Connections
124).
145