Advertisement
Quick Links
Advertisement
Related Manuals for EdgeStar FP430-FP860
Summary of Contents for EdgeStar FP430-FP860
-
Page 2: Safety Precautions
When positioning the portable freezer, ensure that there is at least a 2” clearance at the sides and a 4” clearance at the back of the portable freezer. This will allow for adequate ventilation of heat from the back of the freezer. -
Page 3: Obtaining Warranty Service
DESCRIPTION OF WARRANTY SERVICE: All defective product components covered by this warranty will be repaired or replaced, at EdgeStar’s option, free of charge on a mail-in basis to EdgeStar’s authorized repair facility during the first 90 days from the date of original purchase. -
Page 4: Limited Waranty
The freezer is noisy. LIMITED WARANTY This EdgeStar product is warranted to be free from defective workmanship and materials for the first year following the date of original purchase. Replacement parts will be supplied free of charge for the first year following the date of original purchase. Labor will be performed free of charge for the first 90 days following the date of original purchase. -
Page 5: Unpacking Parts And Features
UNPACKING PARTS AND FEATURES Your portable freezer is supplied with all the accessories you need to enjoy refrigeration almost anywhere. Below is an image of the freezer and its respective features. 1. Latch 2. Insulated lid 3. Wire baskets 4. Side handle 5. - Page 6 24V power source. Remove all interior and exterior packaging. Position the freezer in a dry and well-ventilated place. Keep the freezer away from direct sunlight, heaters and corrosive gas. Clean the interior surface with a little bit of lukewarm water and a soft cloth.
-
Page 7: Operating Your Portable Freezer
7. LED display: shows the temperature in Fahrenheit (°F) Temperature Adjustment 1. When the freezer is plugged in to a power outlet, press the “set” button. The LED will display the factory pre-set temperature of 0°F 2. To adjust the temperature: a.