Transporting; Cleaning Rugs - Hoover U9125 Manual

Transporting upright cleaner
Put handle in upright position. Tilt cleaner back on rear wheels and
6
push forward.
Carrying cleaner
The cleaner can be carried by placing hand under the control panel
7
and lifting.
Handle positions
The handle of your cleaner has three positions: upright for storage
8
and for when using cleaning tools; operating position for general
operation on carpets and floors; low for reaching under low furniture.
Step on handle release pedal (A), then pull handle back to lower handle.
Cleaning lightweight flexible rugs
Set control panel to either HIGH or MED carpet height.
9
Stand on one end of rug and move cleaner toward other end. Before
reaching edge, push down on handle. This will lift up the nozzle and will
prevent the rug from clinging to the cleaner. Continue to lift up nozzle so
that when you have reached the edge, it is completely off the rug. Move
cleaner back to start again, lower nozzle, and use only forward strokes.
A
07
(Cont'd)